Nano Throttle Body Cleaner

ADDITIVES

NANO THROTTLE BODY CLEANER

Nano Throttle Body Cleaner is specially formulated to dissolve and clean throttle body deposits especially gum, varnish, sludge, carbon and dirt build-up. It is also useful in cleaning PCV valve, automatic chokes, EGR valves etc.

Flammable aerosol. Contents under pressure. Use in well ventilated areas. Keep away from heat and flames.
Possible eye irritation. If eye contact occurs, flush eyes immediately with water. Ingestion – do not induce vomiting.
Call physician immediately.
Store in a cool and dry place.
KEEP OUT OF REACH OF CHILDREN

Application

  1. With ignition off, remove air filter and spray inside of throttle body to remove deposits on throttle plate and other parts.
  2. Start the engine and run at medium idle ( about 750 rpm ) and spray the balance of the can inside the throttle body, automatic choke plate, main throttle plate and shaft. ( It is normal for rpm to reduce to 350-400 rpm).
  3. When can is empty, turn off the engine and wait for 5 minutes.
  4. Restart engine, open and close throttle rapidly, within normal limits, for 2 minutes.
  5. Replace air filter.
NOT HARMFUL TO CATALYTIC CONVERTER AND OXYGEN SENSOR. IF SPILLED OR SPRAYED ON PAINTED SURFACE, WIPE DRY OR WASH WITH WATER IMMEDIATELY.